News

Feb 19, 2025

Global Plastics Tubes, Pipes, and Hoses Market to Reach $303.1B by 2030 with +1.9% CAGR - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform. IndexBox has just published a new report: World - Plastic Tubes, Pipes And Hoses, And Fitting -

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: World - Plastic Tubes, Pipes And Hoses, And Fitting - Market Analysis, Forecast, Size, Trends and Insights.

The market for plastic tubes, pipes, hoses, and fittings is expected to see continued growth in demand over the next six years, with a forecasted CAGR of +1.9% in volume and +3.6% in value from 2024 to 2030. By the end of 2030, the market volume is projected to reach 53M tons and the market value is expected to increase to $303.1B. Stay informed on the market performance and trends impacting the industry.

Driven by increasing demand for plastics tubes, pipes and hoses, and fitting worldwide, the market is expected to continue an upward consumption trend over the next six years. Market performance is forecast to decelerate, expanding with an anticipated CAGR of +1.9% for the period from 2024 to 2030, which is projected to bring the market volume to 53M tons by the end of 2030.

In value terms, the market is forecast to increase with an anticipated CAGR of +3.6% for the period from 2024 to 2030, which is projected to bring the market value to $303.1B (in nominal wholesale prices) by the end of 2030.

In 2024, the amount of plastics tubes, pipes and hoses, and fitting consumed worldwide totaled 47M tons, picking up by 2.1% against the year before. The total consumption volume increased at an average annual rate of +3.4% from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of 7.9%. Over the period under review, global consumption attained the peak volume at 48M tons in 2022; however, from 2023 to 2024, consumption remained at a lower figure.

The global plastic pipe and hose market revenue totaled $245.1B in 2024, with an increase of 3.2% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). In general, the total consumption indicated temperate growth from 2013 to 2024: its value increased at an average annual rate of +4.1% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, consumption decreased by -1.4% against 2022 indices. Over the period under review, the global market attained the maximum level at $248.7B in 2022; however, from 2023 to 2024, consumption failed to regain momentum.

China (10M tons) constituted the country with the largest volume of plastic pipe and hose consumption, comprising approx. 21% of total volume. Moreover, plastic pipe and hose consumption in China exceeded the figures recorded by the second-largest consumer, the United States (4.8M tons), twofold. India (4M tons) ranked third in terms of total consumption with an 8.4% share.

In China, plastic pipe and hose consumption expanded at an average annual rate of +4.1% over the period from 2013-2024. In the other countries, the average annual rates were as follows: the United States (+1.3% per year) and India (+5.5% per year).

In value terms, the largest plastic pipe and hose markets worldwide were the United States ($41B), China ($37B) and Japan ($25.8B), together accounting for 42% of the global market. India, Mexico, Brazil, Germany, Russia, Turkey and Pakistan lagged somewhat behind, together accounting for a further 24%.

Turkey, with a CAGR of +11.0%, saw the highest rates of growth with regard to market size among the main consuming countries over the period under review, while market for the other global leaders experienced more modest paces of growth.

The countries with the highest levels of plastic pipe and hose per capita consumption in 2024 were the United States (14 kg per person), Turkey (14 kg per person) and Russia (14 kg per person).

From 2013 to 2024, the most notable rate of growth in terms of consumption, amongst the key consuming countries, was attained by Mexico (with a CAGR of +6.9%), while consumption for the other global leaders experienced more modest paces of growth.

The products with the highest volumes of consumption in 2024 were rigid tubes, pipes and hoses of polymers of ethylene (12M tons), rigid tubes, pipes and hoses of polymers of vinyl chloride (11M tons) and flexible tubes, pipes and hoses of plastics, without fittings (6.6M tons), together accounting for 62% of global consumption.

From 2013 to 2024, the biggest increases were recorded for flexible tubes, pipes and hoses of plastics, without fittings (with a CAGR of +5.5%), while consumption for the other products experienced more modest paces of growth.

In value terms, flexible tubes, pipes and hoses of plastics, without fittings ($44.3B), rigid tubes, pipes and hoses of polymers of ethylene ($36.7B) and plastic fittings for tubes, pipes and hoses ($35.4B) appeared to be the products with the highest levels of market value in 2024, with a combined 47% share of the global market. Rigid tubes, pipes and hoses of polymers of vinyl chloride, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa, rigid tubes, pipes and hoses, of other polymers, other plastic tubes, pipes and hoses, flexible tubes, pipes and hoses of plastics, with fittings and rigid tubes, pipes and hoses of polymers of propylene lagged somewhat behind, together comprising a further 53%.

Among the main consumed products, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa, with a CAGR of +6.5%, recorded the highest growth rate of market size over the period under review, while market for the other products experienced more modest paces of growth.

In 2024, approx. 47M tons of plastics tubes, pipes and hoses, and fitting were produced worldwide; with an increase of 2.1% on 2023 figures. The total output volume increased at an average annual rate of +3.3% from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 when the production volume increased by 7.9%. Global production peaked at 48M tons in 2022; however, from 2023 to 2024, production failed to regain momentum.

In value terms, plastic pipe and hose production expanded to $242B in 2024 estimated in export price. Overall, the total production indicated a tangible expansion from 2013 to 2024: its value increased at an average annual rate of +4.1% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, production decreased by -2.9% against 2022 indices. The growth pace was the most rapid in 2021 with an increase of 14% against the previous year. Global production peaked at $249.3B in 2022; however, from 2023 to 2024, production failed to regain momentum.

The country with the largest volume of plastic pipe and hose production was China (11M tons), accounting for 24% of total volume. Moreover, plastic pipe and hose production in China exceeded the figures recorded by the second-largest producer, the United States (4.5M tons), twofold. The third position in this ranking was held by India (4M tons), with an 8.6% share.

In China, plastic pipe and hose production expanded at an average annual rate of +4.5% over the period from 2013-2024. The remaining producing countries recorded the following average annual rates of production growth: the United States (+0.6% per year) and India (+5.5% per year).

The products with the highest volumes of production in 2024 were rigid tubes, pipes and hoses of polymers of ethylene (12M tons), rigid tubes, pipes and hoses of polymers of vinyl chloride (11M tons) and flexible tubes, pipes and hoses of plastics, without fittings (6.1M tons), with a combined 61% share of global production. Plastic fittings for tubes, pipes and hoses, other plastic tubes, pipes and hoses, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa, rigid tubes, pipes and hoses of polymers of propylene, rigid tubes, pipes and hoses, of other polymers and flexible tubes, pipes and hoses of plastics, with fittings lagged somewhat behind, together comprising a further 39%.

From 2013 to 2024, the biggest increases were recorded for rigid tubes, pipes and hoses of polymers of propylene (with a CAGR of +5.2%), while production for the other products experienced more modest paces of growth.

In value terms, flexible tubes, pipes and hoses of plastics, without fittings ($40.5B), rigid tubes, pipes and hoses of polymers of ethylene ($37.1B) and plastic fittings for tubes, pipes and hoses ($34.3B) were the products with the highest levels of production in 2024, together comprising 46% of global production. Rigid tubes, pipes and hoses of polymers of vinyl chloride, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa, rigid tubes, pipes and hoses, of other polymers, other plastic tubes, pipes and hoses, flexible tubes, pipes and hoses of plastics, with fittings and rigid tubes, pipes and hoses of polymers of propylene lagged somewhat behind, together accounting for a further 54%.

Among the main produced products, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa, with a CAGR of +6.9%, saw the highest growth rate of market size over the period under review, while production for the other products experienced more modest paces of growth.

After eight years of growth, purchases abroad of plastics tubes, pipes and hoses, and fitting decreased by -2.8% to 5.4M tons in 2024. The total import volume increased at an average annual rate of +2.3% over the period from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2021 when imports increased by 15%. Over the period under review, global imports reached the peak figure at 5.5M tons in 2023, and then fell modestly in the following year.

In value terms, plastic pipe and hose imports shrank to $29.1B in 2024. Over the period under review, total imports indicated a noticeable expansion from 2013 to 2024: its value increased at an average annual rate of +3.0% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, imports decreased by -7.8% against 2022 indices. The pace of growth was the most pronounced in 2021 when imports increased by 25%. Over the period under review, global imports reached the peak figure at $31.6B in 2022; however, from 2023 to 2024, imports stood at a somewhat lower figure.

Mexico (748K tons) and the United States (527K tons) represented roughly 24% of total imports in 2024. The following importers - Iraq (197K tons), Germany (185K tons), Belgium (185K tons), France (167K tons), Canada (113K tons), the Netherlands (113K tons), Saudi Arabia (95K tons) and Spain (92K tons) - together made up 21% of total imports.

From 2013 to 2024, the biggest increases were recorded for Mexico (with a CAGR of +13.0%), while purchases for the other global leaders experienced more modest paces of growth.

In value terms, the largest plastic pipe and hose importing markets worldwide were the United States ($3.4B), Mexico ($1.9B) and Germany ($1.9B), with a combined 25% share of global imports. France, Canada, the Netherlands, Belgium, Spain, Iraq and Saudi Arabia lagged somewhat behind, together accounting for a further 17%.

Spain, with a CAGR of +7.2%, recorded the highest growth rate of the value of imports, among the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.

In 2024, flexible tubes, pipes and hoses of plastics, without fittings (1.3M tons), distantly followed by plastic fittings for tubes, pipes and hoses (864K tons), other plastic tubes, pipes and hoses (796K tons), rigid tubes, pipes and hoses of polymers of ethylene (720K tons), rigid tubes, pipes and hoses of polymers of vinyl chloride (682K tons), rigid tubes, pipes and hoses, of other polymers (327K tons) and rigid tubes, pipes and hoses of polymers of propylene (301K tons) were the largest types of plastics tubes, pipes and hoses, and fitting, together creating 94% of total imports.

From 2013 to 2024, the biggest increases were recorded for flexible tubes, pipes and hoses of plastics, without fittings (with a CAGR of +7.3%), while purchases for the other products experienced more modest paces of growth.

In value terms, the largest types of imported plastics tubes, pipes and hoses, and fitting were plastic fittings for tubes, pipes and hoses ($8.2B), flexible tubes, pipes and hoses of plastics, without fittings ($5.5B) and other plastic tubes, pipes and hoses ($5.2B), with a combined 65% share of global imports. Rigid tubes, pipes and hoses of polymers of ethylene, rigid tubes, pipes and hoses, of other polymers, flexible tubes, pipes and hoses of plastics, with fittings, rigid tubes, pipes and hoses of polymers of vinyl chloride, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa and rigid tubes, pipes and hoses of polymers of propylene lagged somewhat behind, together accounting for a further 35%.

Among the main imported products, flexible tubes, pipes and hoses of plastics, with fittings, with a CAGR of +7.6%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other products experienced more modest paces of growth.

The average plastic pipe and hose import price stood at $5,435 per ton in 2024, shrinking by -3.9% against the previous year. Over the period under review, the import price, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the average import price increased by 8.5% against the previous year. Over the period under review, average import prices hit record highs at $5,835 per ton in 2022; however, from 2023 to 2024, import prices stood at a somewhat lower figure.

Prices varied noticeably by the product type; the product with the highest price was flexible tubes, pipes and hoses of plastics, with fittings ($11,044 per ton), while the price for rigid tubes, pipes and hoses of polymers of vinyl chloride ($2,368 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by flexible tubes, pipes and hoses of plastics, with fittings (+4.8%), while the other products experienced more modest paces of growth.

The average plastic pipe and hose import price stood at $5,435 per ton in 2024, dropping by -3.9% against the previous year. In general, the import price, however, recorded a relatively flat trend pattern. The growth pace was the most rapid in 2018 an increase of 8.5%. Over the period under review, average import prices attained the maximum at $5,835 per ton in 2022; however, from 2023 to 2024, import prices remained at a lower figure.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Germany ($10,011 per ton), while Iraq ($2,399 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Canada (+5.8%), while the other global leaders experienced more modest paces of growth.

In 2024, approx. 5M tons of plastics tubes, pipes and hoses, and fitting were exported worldwide; declining by -2.8% against the year before. The total export volume increased at an average annual rate of +1.7% over the period from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2021 with an increase of 14% against the previous year. As a result, the exports reached the peak of 5.3M tons. From 2022 to 2024, the growth of the global exports remained at a lower figure.

In value terms, plastic pipe and hose exports reduced to $29.9B in 2024. Over the period under review, total exports indicated a perceptible increase from 2013 to 2024: its value increased at an average annual rate of +3.2% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, exports decreased by -6.8% against 2022 indices. The growth pace was the most rapid in 2021 with an increase of 24%. The global exports peaked at $32.1B in 2022; however, from 2023 to 2024, the exports failed to regain momentum.

In 2024, China (1.2M tons) was the key exporter of plastics tubes, pipes and hoses, and fitting, generating 25% of total exports. Turkey (336K tons) held the second position in the ranking, followed by Germany (317K tons), Italy (264K tons) and the United States (240K tons). All these countries together took near 23% share of total exports. The Philippines (217K tons), Mexico (164K tons), Spain (138K tons), Poland (129K tons) and Canada (127K tons) followed a long way behind the leaders.

From 2013 to 2024, average annual rates of growth with regard to plastic pipe and hose exports from China stood at +8.0%. At the same time, the Philippines (+52.9%), Mexico (+9.9%), Canada (+3.5%) and Spain (+2.9%) displayed positive paces of growth. Moreover, the Philippines emerged as the fastest-growing exporter exported in the world, with a CAGR of +52.9% from 2013-2024. Poland and Turkey experienced a relatively flat trend pattern. By contrast, Italy (-1.1%), Germany (-2.9%) and the United States (-3.6%) illustrated a downward trend over the same period. China (+12 p.p.), the Philippines (+4.3 p.p.) and Mexico (+1.9 p.p.) significantly strengthened its position in terms of the global exports, while Turkey, Italy, the United States and Germany saw its share reduced by -1.7%, -1.9%, -3.8% and -4.2% from 2013 to 2024, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, China ($4.4B), the United States ($3.9B) and Germany ($3.5B) appeared to be the countries with the highest levels of exports in 2024, with a combined 39% share of global exports. Italy, Poland, Turkey, Canada, Mexico, Spain and the Philippines lagged somewhat behind, together accounting for a further 20%.

The Philippines, with a CAGR of +33.0%, recorded the highest rates of growth with regard to the value of exports, in terms of the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.

The exports of the five major types of plastics tubes, pipes and hoses, and fitting, namely other plastic tubes, pipes and hoses, rigid tubes, pipes and hoses of polymers of ethylene, flexible tubes, pipes and hoses of plastics, without fittings, rigid tubes, pipes and hoses of polymers of vinyl chloride and plastic fittings for tubes, pipes and hoses, represented more than two-thirds of total export. Rigid tubes, pipes and hoses of polymers of propylene (322K tons) held the next position in the ranking, followed by rigid tubes, pipes and hoses, of other polymers (310K tons). All these products together took approx. 13% share of total exports.

From 2013 to 2024, the most notable rate of growth in terms of shipments, amongst the main exported products, was attained by flexible tubes, pipes and hoses of plastics, without fittings (with a CAGR of +4.5%), while the other products experienced more modest paces of growth.

In value terms, the largest types of exported plastics tubes, pipes and hoses, and fitting were plastic fittings for tubes, pipes and hoses ($7.8B), flexible tubes, pipes and hoses of plastics, without fittings ($5.7B) and other plastic tubes, pipes and hoses ($5.3B), together accounting for 63% of global exports. Rigid tubes, pipes and hoses of polymers of ethylene, rigid tubes, pipes and hoses, of other polymers, flexible tubes, pipes and hoses of plastics, with fittings, rigid tubes, pipes and hoses of polymers of vinyl chloride, flexible tubes, pipes and hoses of plastics, with a burst pressure ≥ 27,6 MPa and rigid tubes, pipes and hoses of polymers of propylene lagged somewhat behind, together accounting for a further 37%.

Flexible tubes, pipes and hoses of plastics, with fittings, with a CAGR of +7.1%, recorded the highest growth rate of the value of exports, in terms of the main exported products over the period under review, while shipments for the other products experienced more modest paces of growth.

The average plastic pipe and hose export price stood at $5,994 per ton in 2024, shrinking by -4% against the previous year. Over the period from 2013 to 2024, it increased at an average annual rate of +1.6%. The most prominent rate of growth was recorded in 2021 when the average export price increased by 8.2% against the previous year. Over the period under review, the average export prices reached the peak figure at $6,245 per ton in 2023, and then contracted in the following year.

There were significant differences in the average prices amongst the major exported products. In 2024, the product with the highest price was plastic fittings for tubes, pipes and hoses ($10,926 per ton), while the average price for exports of rigid tubes, pipes and hoses of polymers of vinyl chloride ($2,314 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by flexible tubes, pipes and hoses of plastics, with fittings (+4.4%), while the other products experienced more modest paces of growth.

In 2024, the average plastic pipe and hose export price amounted to $5,994 per ton, dropping by -4% against the previous year. Over the period from 2013 to 2024, it increased at an average annual rate of +1.6%. The pace of growth was the most pronounced in 2021 when the average export price increased by 8.2% against the previous year. Over the period under review, the average export prices reached the peak figure at $6,245 per ton in 2023, and then reduced modestly in the following year.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was the United States ($16,141 per ton), while the Philippines ($2,523 per ton) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by the United States (+8.6%), while the other global leaders experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the global market for plastic pipe and hose. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:

+ the largest producing countries

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Importers on The Market and How They Succeed

The Largest Exporters on The Market and How They Succeed

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles